Skip to content

orcaslicer-2-5

1 post with the tag “orcaslicer-2-5”

OrcaSlicer 2.5 Is Out: I Timed the Same Print in 2.4.2 and 2.5

OrcaSlicer 2.5 is out of alpha. Since my alpha video last week, I’ve put the release through one simple test: slice and print the exact same model in 2.4.2 and 2.5, then compare what the slicer promised against what the printer actually did.

The short version: 2.5 printed slightly faster, and its time estimate was far closer to reality. The second part is the bigger deal.

Do this first. It takes a minute.

  1. In OrcaSlicer, open Help → Show Configuration Folder.
  2. Select everything in that folder and compress it into a zip archive.
  3. Move the zip somewhere outside the OrcaSlicer folder.

If anything goes sideways after the upgrade, you can drop your printer, filament, and process profiles straight back in.

  • Model: a 60 × 60 × 60 mm cylinder. I chose it because it also shows how the seam is placed.
  • Infill: gyroid
  • Settings: the same profile in both versions
Slicer estimate Actual print time Estimate error
OrcaSlicer 2.4.2 1 h 25 min 1 h 18 min 7 min over
OrcaSlicer 2.5 1 h 15 min 1 h 16 min 1 min under

Read that table carefully. The estimates differ by 10 minutes. The actual prints differ by 2.

So 2.5 really is faster on this model, but only by about 2 minutes. The rest of that 10-minute gap is 2.4.2 overestimating its own print time. 2.5’s estimate came within a minute of the real print time.

If you quote jobs, plan prints around a schedule, or price prints by machine time, an accurate estimate is worth more than the two minutes.

The slicer’s per-feature breakdown shows where 2.5 changed things:

Feature (estimated) 2.4.2 2.5 Difference
Sparse infill 37 min 10 s 29 min 41 s −7 min 29 s
Travel 6 min 13 s 5 min 15 s −58 s

Travel: with infill hidden in the preview, the travel paths (the blue lines) in 2.5 are visibly shorter and better ordered, even on a model this simple.

Sparse infill: this is the big one. 2.5 adds a Sparse Infill Smooth Factor that rounds the corners of the infill path. That lets the toolhead hold more of its speed through turns instead of braking into every corner. Gyroid is already curvy, and smoothing makes it curvier.

Those two rows add up to about 8.5 of the 10 estimated minutes. Because the actual print was only 2 minutes faster, much of that “saving” was the old estimate being too pessimistic, not the printer finishing early. That’s still a good result. Just don’t expect a 10-minute saving on your own prints because the slicer says so.

  • The Delete key works again. In my alpha video, Delete didn’t remove selected objects. In 2.5 it does.
  • Z contouring works on multiple objects. It now behaves correctly with more than one shape on the plate.
  • Primitives take typed dimensions. Right-click → Add Primitive → Cube, and you can type the size directly instead of creating the object and then resizing it in a separate menu. I use primitives constantly for test prints, so this saves me a step every time.
  • Inward wipe at the seam. There’s a setting to have the nozzle wipe inward as it finishes a loop at the seam. I haven’t seen a visible difference in my seams yet. That’s on my tuning, not on Orca.

2.5 introduces Python plugins: a supported way to add your own features to the slicer without maintaining a fork. You can turn each plugin on or off and watch what it does to the toolpath.

I’m already using this to experiment with a custom infill pattern. One warning from experience: turn a plugin off when you’re done testing it. I left one of my tuning plugins enabled and it quietly changed a model I sliced afterward. OrcaSlicer also asks for permission before a plugin reaches outside its data folder, goes online, or launches another program. Only install plugins you trust.

Yes, once your profiles are backed up. Better estimates and faster sparse infill are worth it on their own, and the bug fixes remove some real friction from the alpha.

One caveat: this is a single model with a single infill pattern. Your time savings will depend on how much of each print is sparse infill and travel. Slice one of your own regular prints in both versions and compare.


Stop recalculating the same calibration math. Rotation distance, pressure advance, max volumetric speed, input shaping, and 20+ more calculators are free at go.minimal3dp.com.

Watch the video · Free Klipper configs · OrcaSlicer tutorials hub

No sponsored printer reviews. Ever.