This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

M3DP Project Plans and Journals

Minimal3DP project plans and journals. A place for me to document my projects

As I plan projects, I wanted a place where I could gather my thoughts and plans. I also want to start keeping project journals.

It usually takes me a while to work on my various projects. I store references all over the place. I am hoping that this could be a place for me to gather everything. As I work in a project, I would like to be able to document the process.

I have alot of projects planned for Minimal 3DP. I look forward to getting to work and sharing.

1 - Voron 2.4 R2

I recently purchased a Voron 2.4 R2 kit. This is my project log and references

Voron 2.4 R2 Project log and References

Voron 2.4 R2 landing page.

1.1 - Voron 2.4 R2 Pro+ Build References

Build references for the Voron 2.4 R2 Pro+ from FormBot

Build references and links for the Voron 2.4 R2 Pro+ FormBot kit. I needed a centralized location for all the reference material I need to build the 3D printer.

References and Links

Kit

Voron Refs

FormBot References:

YouTube

1.2 - Voron 2.4 R2 Pro+ Build Parts List

Parts List for the Voron 2.4 R2 Pro+ from FormBot

Parts List for the Voron 2.4 R2 Pro+ FormBot kit. I will show the parts list from FrormBot but at the end of the page I will include my cross-checks.

Parts List from FormBot

Kit

FormBot Parts

FormBot Parts List

FormBot Parts List
Photo: Various Sources

M3DP Parts List (Updated as I use Parts)

Frame

  • M5 x 16 BHCS
  • 10 A Extrusions
  • 4 B Extrusions
  • 2 C Extrusions
  • 1 D Extrusion
  • 1 E Extrusion
  • 4 Corner Brackets

1.3 - Voron 2.4 R2 Pro+ Build - Building the Frame

Build the FormBot Voron 2.4 R@ Pro+ Frame

In this section, I will be building the frame of my Voron 2.4 R2 Kit

References and Links

Build Steps

The Voron assembly manual starts with the building of the frame. I will start from this point.

Blind Joints

Voron Build Guide - Blind Joints
Photo: Various

Frame

Using the blind joints. The Frame is assembled.

Frame Parts

  • M5 x 16 BHCS
  • 10 A Extrusions
  • 4 B Extrusions
  • 2 C Extrusions
  • 1 D Extrusion
  • 1 E Extrusion
  • 4 Corner Brackets

Assembled Frame
Photo: Various

2 - Belt Driven Ender 3 Build

I am starting work on a Belt Driven Ender 3

Belt Driven Ender 3 Project Log and References

Belt Driven Ender 3 landing page.

3 - vzBot Build

I am starting work to call nevert my TronXY 5sa into avzBot

vzBot Project log and References

vzBot landing page.